消息

BACK

0.4×0.5 mm Press-fit pins – saving space and money solution for lighting electronics and more

23/03/2022

Over the past 10 years, 0.4×0.5 mm press-fit pin has become one of the most in-demand products in SM Contact portfolio. The company supplies around 100 million pins of this type per year. This small eye-of-the-needle (EON) terminal is in wide demand in the automotive industry, especially in lighting electronics, because it’s cost-effective and space-saving. It is designed to replace soldered parts on printed circuit boards (PCB) and connectors.

Advantages of 0.4×0.5 mm press-fit pins:

qualified in accordance with IEC 60352-5, Press-in connections (report available on request);

It proved to have required contact resistance (< 0.5 mΩ), no cracks, acceptable deformations and resistance to rapid temperature changes and climate sequences.

– small size of the pin affects the price downwards;

0.4×0.5 mm Press-fit pin’s reduced cost is based on its manufacturing process. It is a drawn-wire product with no-waste of raw material, and offers a high level of customization without non-returnable investment of any kind.

suitable for Nano MQS connector family;

– small pin size and distance between inserted pins allows for use in compact spaces, which is very important in the automotive industry.

Characteristics and requirements:

– press-in force – less than 60 N, average 42 N;

– push-out force – more than 50 N, average 73 N;

– recommended PCB hole for insertion – Ø 0.6 mm;

– hole pitch 1.6 mm (compare with standard 0.6 mm pin pitch in 2/2.5 mm) – can be wider on request;

– pin material CuNiSi – K55, hardened copper alloy with excellent spring properties and good corrosion resistance. It combines medium electrical conductivity with high strength and good relaxation behaviour.

End-to-end supply

Pins are supplied in plastic reels in end-to-end format. Reels are compact (Ø 800 mm), easy to change and rechargeable. Each contains approximately 200 000 pins. End-to-end format means you don’t have to waste extra material.

Pin insertion equipment

Assembly of 0.4×0.5 mm press-fit terminals to PCB can be efficiently accomplished with SM Contact insertion equipment and a custom-designed insertion head. Pininsert machines can feed, cut and insert a single pin in full automatic mode, with a tack time around up to 0.3 sec per pin.

Pininsert 2100 and Pininsert 2100 XL Pininsert 3200
Semi-automatic pin insertion into the PCB. Stand-alone or inline machine for small and medium production volumes (up to 3 600 pins per hour). Conveyor version of high-volume semi-automatic pin insertion into PCB.

Pin bending

0.4×0.5 mm press-fit pins offer various ways to process shape modifications as necessary. It’s possible to perform electrical connections at 90 degrees in order to optimise spaces. Bending module can be:

stand-alone or integrated into the machine,

– with conveyor or manual loading of PCB.

Bending of pins can be performed either before or after insertion into PCB:

Bending before insertion Bending after insertion

In addition to 0.4×0.5 mm, the following press-fit pins have been in production at SM Contact for over a decade:
0.6 x 1 mm,
0.63 x 0.63 mm,
0.6 x 1.2 mm,
0.8 x 1.4 mm.

Please send requests to SM Contact team smcontact@smcontact.eu

Category: 引脚插入
Latest posts
© SM Contact 2024