Pneumatic or servo-drive table-mount machine for semi-automatic pin insertion into various electrical components. Speed up to 3 600 pins per hour.

2017-04-07T00:00:00
INTERCONNEXION DE PICOTS

En vrac

in bulk

En filDiametre de la bobine – 800 mm, quantite – 200 000 pins

end-to-end

En cartouche

bandolier

CHAMPS D'APPLICATION

ÉNERGIE ALTERNATIVE

Texte sur le bouton

AUTOMOTIVE

Texte sur le bouton

ELECTRONIQUE

Texte sur le bouton

INDUSTRIE DE L'IMPRIMERIE

Texte sur le bouton

TÉLÉCOMMUNICATIONS

Texte sur le bouton

TEXTILE

Texte sur le bouton

TYPES DE COMPOSANTS

PIN & COIL FRAME

Texte sur le bouton

PIN & METAL

Texte sur le bouton

PIN & PCB

Texte sur le bouton

PIN & PLASTIC COMPONENT

Texte sur le bouton

PIN & PLASTIC COMPONENT & PCB

Texte sur le bouton

CUSTOMIZED CONNECTORS

Texte sur le bouton

pourquoi en avoir besoin ?

Low insertion force

Low insertion force simplifies the assembly and makes it cheaper.

Qualification

Pressfit pins 0.50×0.40 mm, 0.60×1.00 mm, 0.60×0.60 mm are qualified in accordance to EN 60352-5. It proved to have required contact resistance (< 0.5 m?), acceptable deformations and resistance to rapid temperature changes and climate sequences.

Compatibility with holes of different diameters

Various pin press shapes allow large tolerances of hole diameter, which makes possible to select insertion and retention forces according to Customer’s demand.

Reparability

Unlike solder joints pins can be designed to be removable to repair connection, if needed.

Cost-efficient

Instead of buying expensive connector, it is necessary to buy only pins that will fit Customer’s component.

Automotive norms

Pin tip dimensions matches norms of such automotive manufacturers as BMW, GM, Daimler-Benz, PSA, VW, etc. Norms consider precut angle, rounding diameter, width and height of a pin tip.

Adaptability

Pin connection is adjustable in height and position, it can be inserted in necessary quantity into various components: PCB, plastic or metal connectors, coil frame, etc.

Easy to go

Thanks to automation it’s possible to insert up to 15000 pins per hour without any experience in pin interconnections.

Deformation and vibrations resistance

Pin insertion doesn’t require additional soldering which means no thermal stress and no damage for components. As a result connection stays reliable under vibrations.

comment procédons-nous ?

  • 1. PIN PARAMETERS DEFINITION
    We define pin features depending on type of application, connector/component materials, working environment and temperature range.

    What you get?
    Pin material (bronze, brass, CuFe2p, CuMg0.1, CuNi3SiMg, CuNiSi, Staku30), coating material (Ni-based 1.3-3 μ: Ag, Au, Sn), shape (square, round, rectangular), type (smooth, star, winged, harpoon, pressfit, double), length (2-70 mm).

  • 2. TOOLING DEFINITION
    Tooling is defined based on corresponding request by SM Contact engineers with a help of database of former realized connections.

    What you get?
    Equipment type, special tool necessity definition.

  • 3. PIN INSERTION SIMULATION
    With a help of FEA software we build components computer model of defined type and materials and simulate strains and stresses during pin insertion.

    What you get?
    Optimal insertion parameters and its improvement options are specified to match industry norms and Customer’s demand.

  • 4. LABORATORY TESTS
    We make samples and perform laboratory study: press-in and pull-out force, contact resistance test.

    What you get?
    Report with precise connection parameters matching norms and Customer’s requirements.

  • 5. EQUIPMENT MANUFACTURING
    Engineering department adapts automation level, speed, special options and quality control devices.

    What you get?
    Pin insertion equipment customized for Customer’s application, as well as for quality, automation, cost and production volume requirements.

SMOOTH

This simple-shaped type of pin has chamfers on both ends so that it can be used for connection purposes.

Application

Coil frame, printed circuits without metalized holes, over-molding, plastic components with drilled holes, metal components whose holes diameter has small tolerances.

Dimensions

Wire shape

Square

Round
A1 0.3 0.4 0.46 0.5 0.71 0.91 1 1.14 0.5 0.63 1
B1 0.2 0.25 0.25 0.25 0.35 0.45 0.55 0.6 0.3 0.3 0.4

STAR

The Star pin is ideal for printed circuits with metalized holes to compensate holes diameter tolerances after drilling. It offers an excellent mechanical resistance and its shape is often used in “paste-in-pin and reflow” or “pin-in-paste and reflow” processes.

Its star shape, unlike the smooth pin, can be also used advantageously for round holes in plastic elements. When inserted, the smooth tip of a pin enters freely without any damage, while the star part provides its secure retention inside of a component thanks to its 4 peaks.

Application

Single- or double-sided printed circuits, coil frame, plastic connectors.

Dimensions:

 

Wire shape Square
A1 0.3 0.3 0.4 0.4 0.46 0.46 0.5 0.5 0.63 0.63 0.71 0.71 0.91 0.91 1 1 1.14 1.14
A2 – – – – – – – – – – – – – – – – – –
C 0.5 0.55* 0.63 0.7* 0.73 0.8* 0.78 0.84* 0.97 1.07* 1.17 1.24* 1.5 1.55* 1.73 1.8* 1.93 2*
D 1.1 1.1 1.1 1.1 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
B1 0.2 0.2 0.25 0.25 0.25 0.25 0.25 0.25 0.3 0.3 0.35 0.35 0.55 0.55 0.55 0.55 0.6 0.6
B2 – – – – – – – – – – – – – – – – – –

 

Wire shape Rect. Round
A1 0.63 0.5 0.5 1 1 1.5 1.5 1.5
A2 1 – – – – – – –
C 1.27 0.66 0.7* 1.32 1.4* 1.78 1.78 1.78
D 1.5 0.8 0.8 1.5 1.5 1.5 1.5 1.5
B1 0.3 0.3 0.3 0.4 0.4 0.7 0.8 0.9
B2 0.5 – – – – – – –

* Reinforced star

WINGS / HARPOON

Winged and harpoon pins suit square holes in plastic elements, guaranteeing excellent mechanical resistance of the pins in their seats thanks to its 2 peaks. At the same time the smooth tip of a pin enters freely without any damage.

These pins meet the requirements of automotive manufacturers for connector applications.

Application

Plastic connector.

Dimensions

                          

Wire shape Square – wings Square – harpoon
A1 0.63 0.63 0.63
C 0.93 0.84 0.85
D 1 1 0.65
B1 0.3 0.3 0.3

PRESSFIT

Pressfit flexible geometry matches components with various hole diameter tolerances. It can deal with deviations of + 0.10 to – 0 mm, in compliance with the IEC 352.5 standard.

Size difference between hole and pressfit zone leads to pressfit deformation during insertion. Subsequent сompression of a pin guarantees reliable connection, which doesn’t need to be soldered.

Application

Double-sided printed circuits. Particularly for automotive industry.

Dimensions

Wire shape Rectangular Square
A1 0.4 0.6 0.63 0.63 0.63 0.63 0.63 0.63 0.63 0.63
A2 0.5 1 0.8 – – – – – – –
C 0.7 1.34 1.15 1.12 1.12 1.12 1.12 1.12 1.12 1.1
D 1.8 3 3 1.8 1.8 2.66 2.66 3 3 3
B1 0.2 0.27 0.24 0.25 0.3 0.25 0.3 0.25 0.3 0.3
B2 0.25 0.5 0.45 – – – – – – –

** D=1.8 – pressfit short D=2.66 – pressfit medium D=3 – pressfit long

COMBINATIONS

One pin can have several press shapes for direct interconnection of two elements. Pin length, shape and type is defined individually for each connection.

Application

Stacking of PCBs, stacking of PCBs with a plastic part.

Check out splice equipment options! Each machine can be customized to particular components,
environment, automation level, and production volumes.


PININSERT 2100
Semi-automatic pin
insertion into
the PCB
Read More

PININSERT 2100 XL
High-volume semi-automatic
pin insetion into
the PCB or plastic parts
Read More

PININSERT 3200
Version convoyeur d’une
machine semi-automatique
pour insérer une broche dans un PCB
Plus de détails

RELATED ARTICLES

23 Nov
2018
electronica – afterword

Exhibitions participating and visiting is a kind of a holiday. You anticipate amazing discoveries, meetings, booths decoration, presents and perspective handshakes. Especially when it is referred to electronica, the largest European show for electronic components, systems, applications and solutions

EN SAVOIR PLUS
06 Nov
2018
Pleased to meet you at electronica in November, 13-16

Traditionally, autumn is time to harvest and share achievements. And we’d like to greet you at electronica (booth B3.262), where we demonstrate 2018 upgrades in splice crimping, pin insertion, quality measuring technologies and (novelty!) customer access system to project data

EN SAVOIR PLUS
16 Mar
2018
SM Contact at ElectronTechExpo in Moscow (BOOTH B107)

This year SM Contact for the second time in a row presents its production and engineering services at the exhibition in Moscow in April, 17-19. ElectronTechExpo is the leading platform gathering technologies, equipment and materials for electronic and electrical industries.

EN SAVOIR PLUS
08 Dec
2017
SM Contact at productronica 2017

Indeed, productronica has all features of the New Year holiday: it happens once a year ≈ in the same time (alternately with electronica), we anticipate it, have a lot of preparations and time crunch, we “decorate” our booth, wait for guests, host a party and believe in miracles.

EN SAVOIR PLUS

MORE NEWS

Plan du site | Dispositions légales
creative
agency
© SM Contact 2024
XThis website uses cookies
We use cookies to ensure that we give you the best experience on our website: to personalise content and ads, to provide social media features and to analyse our traffic. Cookies cannot run programs or transmit viruses to your computer. By using this website, you consent to our use of cookies on this device in accordance with our Privacy and Cookies policy.