Nachrichten

BACK

Magnet wire solutions: terminals vs. splices

18/12/2023

Terminals and splices provide the same solderless crimp technology for magnet wires, while splice is more cost-effective per connection. SM Contact offers P-type splice band (where “P” means piercing) with SM Crimp machines which enable stable high productivity with using the same bobbin for different wire sizes and no wasted material.

Both terminals and splices terminate magnet wire through crimp compression in coils, motors, compressors, transformers, power supplies and other windings. Sharp serrations penetrate varnish coating of a magnet wire and produce robust gastight electrical connection with no pre-stripping. It’s applied instead of soldering and spot welding.

Processing method

Crimp terminals are stamped from the carrier band with a die tool. Except the completed terminals, we get scraps and cuts. Even though this waste material is reused, it still adds to the cost. Also change of the terminal configuration and pitch require new mold production.

Crimp terminals manufacturing
Carrier band Completed terminals Loss of material (scraps)

In comparison to stamping, effectiveness of using the material in splicing is higher:

— no stamping out of material, no loss of material,

— tooling costs are cheaper.

So this solution is more advantageous in terms of price per contact.

splice technology for magnet wire

Comparison of crimp terminals and splices for magnet wire termination

Crimp terminal P-type splice by SM Contact
Technology Crimp connection technology, insulation piercing
Conductivity Same
Material CuZn
Operation equipment Press + Applicator

Applicator is changed for each specific contact.

SM Crimp + cassette

The cassette is adaptable to different connections, with magnet and normal wires.
Connection height can be automatically adjusted.

Keeping, feeding In bobbins
— with strip-fed: after terminals are cut off, there is a wasted carrier strip
In bobbins
— no wastes
Usage — each connection requires certain terminals;
— or a terminal is designed for a smaller cross section range than splice band
— the same splice band can be used in different cassettes for wires of different sizes;
— bobbins are compact:
diameter 165 mm, height 65 mm;
weight 3.2-4 kg
— depending on size and thickness,
e.g. in 1 000 meters – 100 000 splices,
in 500 meters – 50 000 splices
splice band bobbin

SM Crimp machines provide a precisely controlled process of splice crimping in magnet wire connections. Each project is started with profound connection and tooling qualification. The optimal parameters are kept in the machine memory. Readjustment with each new connection is done automatically, reducing the risk of production errors.

Lineup of SM Crimp machines

If you’re terminating magnet wire, discover more about SM Contact technology with P-type splice band: +34 919490803, smcontact@smcontact.eu

Category: Crimpverbindungen
Hinterlassen Sie Ihre Daten und wir
werden uns bei Ihnen melden






Latest posts